Custom Faberkin's bellows are furnished with
complete installation instructions. Bellows can be field mounted to the
table before installation or as a retrofit on existing tables.
A collar is provided at the top of the bellows for mounting purposes.
The collar can be sandwiched against the table with a customer supplied
piece of flat stock secured with screws, bolts or pop rivets. A pocket
is provided on the bottom of the bellows that can be weighted or anchor
bolted to the floor or base frame with back up plates furnished by
the customer.
The outside (A) collar places all the convolutions under
the table as shown in picture above. This collar can only
be used when the convolutions will not interfere with the
scissors of the lift.
The inside (B) collar places all the convolutions beyond
the table as shown in picture below. |
