CUSTOM FABERKIN'S COLUMN GUARDS AND CROSS-RAIL GUARDS
Shown below are a set of four rectangular column guards. The guards are attached to the moving head on a premier FEMCO precision honeycomb saw. Custom Faberkin's Column Guards protect the precision gauged columns from the dust and grit of aluminum, fiber-glass, paper, and rigid plastic honeycombs.

Custom Faberkin's Cross-Rail Guards are constructed in a "C" shape, hooking behind the rail at the top and bottom. The guards protect the screws and shafts from chips, dust, grit, and other abrasive material.

SHADE ROLLER GUARDS
Custom Faberkin's Shade Roller Guards provide an ideal method for protecting machines not requiring a complete seal. Drilling and milling machines, which generate moderate chip loads with short way travel, are well suited for Shade Guard's application.

Shades Guards are available in widths of 18 inches to 12 feet. Rollers are supplied with mounting brackets and can accommodate travels up to 20 feet.

 

P.O. Box 1065 | Fond du Lac, Wisconsin 54936-1065
920-921-5660 | fax 920-921-2840 | sales@faberkin.com